Self Actuated PCV

Self Actuated PCV

Regport Technology is a leading manufacturer of Self Actuated Pressure Control Valves. The basic working principle for this DA-SAPCV is force force-balanced principle achieved by the spring diaphragm mechanism. The fluid pressure acts on the wider area of diaphragm and the balancing force is provided by the spring. Thus fluid force itself is an operating media and the best control is achieved even for the smallest deviation in controlled parameter as its (fluid force) acting on the wider area of diaphragm.

D100 Series - Downstream Pressure Control Valve

Direct Acting Downstream Pressure Regulating Valves – also, called as Pressure Reducing Valves – are meant for reducing the source pressure and regulating the outlet / downstream pressure at the pre-determined set value required for the processes. With direct acting Regulators precise pressure control can be achieved at specified process requirements.
As outlet / downstream pressure tend to drop due to consumption at process, the spring force pushes the diaphragm down, due to which stem & soft seating disc also moves down and opens the port. As soon as outlet / downstream pressure is compensated, the diaphragm pushes up, the stem & soft seating disc also moves up and the port opening closes.

Features

  • Precise Pressure Control : The precise outlet pressure control is achieved with this design affecting efficient response capability and accuracy.

  • Self Actuated Design : This series of pressure regulating valves are self actuated or self contained and hence, do not require any external energy like pneumatic air or electricity to operate.

  • Balanced Trim Design : Due to balanced trim design, the variation in outlet pressure due to change in inlet pressure is minimal.

  • Accurate Pressure Control : The inlet pressure directly acts on the diaphragm to counter balance the spring force affecting efficient response capability and accuracy.

  • Easy Maintenance : The maintenance and inspection of the pressure regulating valve internals is possible without removing body from pipe line.

  • Material selection : As a standard we provide trim material as AISI 316. Wide range of material is available to suit various services for different process fluids including corrosive fluids. NACE compliance can be provided for sour services.

  • Tamper : Resistant Adjustment : Cap and adjusting screw discourage on-field tampering of the pressure setting.

  • Load absorbing Diaphragm assembly : Special load absorbing diaphragm assembly prevents diaphragm failure during heavy load.

  • Leakage Proof : Combination of metallic and soft seat enables the leakage class VI as per ANSI FCI 70.2.

  • Minimum Maintenance Cost : The general replacement parts are polymer parts like Diaphragm, Soft Seat & O Rings only and thus the maintenance cost is very low.

  • Easy Change in Set Pressure : The change in set pressure can easily be achieved by turning the set screw at site. Also, a wide range can be availed with the certain spring and in case, if needed, the spring can be changed at site for achieving desired set pressure with certain limitation.

Material Of Construction​

CS A216 Gr WCB (standard), CF8, CF8M, Aluminium, CF3, CF3M, WC6, WC9, LCB, LCC, AlumBronze, Monel, Inconel or any other material on request.
St St316 (standard), St St304, 316L, Monel, Inconel, Hastelloy B/C or any other material on request
BunaN (Nitrile), Neoprene, Fluroelastomer (Viton), PTFE or any other material suitable for process / on request
Reinforced Polymers like Buna N (Nitrile), Neoprene, Fluroelastomer (Viton), and PTFE with polymer backup
SS302, SS316, Inconel X750 or any other material on request.
Fabricated Steel (Standard) and other on request
Carbon Steel IS4454 Gr.II / III, H12, EN47, SS302, SS316, Inconel X750 or any other material on request.

U100 Series - Upstream Pressure Control Valve ie Back Pressure Regulating Valve

The SAPCV, which monitors and controls the inlet pressure irrespective of variations in outlet pressure and flow rate are called as upstream pressure control valves. These are meant for controlling the inlet pressure at a precise set value or hold the line pressure or back pressure at its inlet and hence, often called as Pressure Holding Valve or Back Pressure Regulating Valves as well.
The U100 Series are Direct Acting Self Actuated Globe Type Medium Pressure Back Pressure Regulating Valves meant to regulate the inlet pressure at the pre-determined set value required for the processes / equipment protection.
As inlet / upstream pressure tend to rise, it pushes the diaphragm up, the stem & soft seat disc also moves up, an opens the port and relief the excessive pressure. As inlet / upstream pressure is compensated the spring force pushes the diaphragm down, the stem & soft seat disc also moves down and port opening closes affecting stoppage of flow.

Features

  • Precise Pressure Control : The precise inlet pressure control is achieved with this design affecting efficient response capability and accuracy.

  • Self Actuated Design : This series of pressure regulating valves are self actuated or self contained and hence, do not require any external energy like pneumatic air or electricity to operate.

  • Balanced Trim Design : Due to balanced trim design, the variation in outlet pressure due to change in inlet pressure is minimal.

  • Accurate Pressure Control : The inlet pressure directly acts on the diaphragm to counter balance the spring force affecting efficient response capability and accuracy.

  • Easy Maintenance : The maintenance and inspection of the pressure regulating valve internals is possible without removing body from pipe line.

  • Material selection : As a standard we provide trim material as AISI 316. Wide range of material is available to suit various services for different process fluids including corrosive fluids. NACE compliance can be provided for sour services.

  • Tamper : Resistant Adjustment : Cap and adjusting screw discourage on-field tampering of the pressure setting.

  • Load absorbing Diaphragm assembly : Special load absorbing diaphragm assembly prevents diaphragm failure during heavy load.

  • Leakage Proof : Combination of metallic and soft seat enables the leakage class VI as per ANSI FCI 70.2.

  • Minimum Maintenance Cost : The general replacement parts are polymer parts like Diaphragm, Soft Seat & O Rings only and thus the maintenance cost is very low.

  • Easy Change in Set Pressure : The change in set pressure can easily be achieved by turning the set screw at site. Also, a wide range can be availed with the certain spring and in case, if needed, the spring can be changed at site for achieving desired set pressure with certain limitation.

Material Of Construction​

CS A216 Gr WCB (standard), CF8, CF8M, Aluminium, CF3, CF3M, WC6, WC9, LCB, LCC, AlumBronze, Monel, Inconel or any other material on request
St St316 (standard), St St304, 316L, Monel, Inconel, Hastelloy B/C or any other material on request
BunaN (Nitrile), Neoprene, Fluroelastomer (Viton), PTFE or any other material suitable for process / on request
Reinforced Polymers like Buna N (Nitrile), Neoprene, Fluroelastomer (Viton), and PTFE with polymer backup
Fabricated Steel (Standard) and other on request
Carbon Steel IS4454 Gr.II / III, H12, EN47, SS302, SS316, Inconel X750 or any other material on request.

Leave a reply

Other Product Item

  • Prepiped Skid Mounted System

    Prepiped Skid Mounted Systems REGPORT offers complete skid mounted, pre-piped and ready to use Pressure Regulating Systems. These are offered for various cylinder gases like Hydrogen, Nitrogen, Dry HCL, Carbon

    Read More

  • Pilot Operated PSV

    R020 Series Pilot Operated Safety Relief Valves A Safety Relief Valve, in which the major relieving device or main valve is combined with and controlled by a self actuated auxiliary

    Read More

Full list of Services

Recent Comments

No comments to show.