U200 Series:- Upstream Pressure Control Valve ie BACK PRESSURE REGULATING VALVE

Home
Product Item
U200 Series:- Upstream Pressure Control Valve ie BACK PRESSURE REGULATING VALVE

The U200 series are pilot operated self actuated globe type medium pressure back pressure regulating valves meant to regulate the inlet pressure at pre-determined set value required for the processes/equipment protection.

Movement occurs as pressure variations register above the diaphragm of main regulator. The registering pressure is the inlet or upstream pressure. The inlet pressure acts on the diaphragm of the pilot. Pilot is an upstream pressure control valve which opens in the event of high upstream pressure than its set pressure. Rise in inlet pressure above the set pressure opens the pilot affecting the main valve to open and flow to take place. The pressure is apply on the diaphragm in main regulator through pilot valve, it pushes the diaphragm down of main regulator, an opens the port. As inlet pressure is compensated, the pilot valve get closed, diaphragm in main regulator moves up due to spring force and port opening closes.

FEATURES

Back Pressure Regulation / Control

These are designed to respond to the smallest rise in pressure at inlet and allow the excess pressure at outlet affecting protection of equipments and helping the efficiency of equipments like pumps and compressors. These are also used as Pressure Holding Valves as they hold the pressure at upstream.

Self Actuated Design

This series of pressure regulating valves are self actuated or self contained and hence, do not require any external energy like pneumatic air or electricity to operate.

Internal impulse Sensing

The impulse sensing is internal ie through the valve body itself avoiding the impulse tubing for sensing.

Accurate Pressure Control

The inlet pressure directly acts on the diaphragm to counter balance the spring force affecting efficient response capability and accuracy.

Easy Maintenance

The maintenance and inspection of the pressure regulating valve internals is possible without removing body from pipe line.

Material selection

As a standard we provide trim material as AISI 316. Wide range of material is available to suit various services for different process fluids including corrosive fluids. NACE compliance can be provided for sour services.

Tamper - Resistant Adjustment

Cap and adjusting screw discourage on-field tampering of the pressure setting.

Leakage Proof

Combination of metallic and soft seat enables the leakage class VI as per ANSI FCI 70.2.

Minimum Maintenance Cost

The general replacement parts are polymer parts like Diaphragm, Soft Seat & O Rings only and thus the maintenance cost is very low.

MATERIAL OF CONSTRUCTION

Body

CS A216 Gr WCB (standard), CF8, CF8M, Aluminium, CF3, CF3M, WC6, WC9, LCB, LCC, AlumBronze, Monel, Inconel or any other material on request.

Internals

St St316 (standard), St St304, 316L, Monel, Inconel, Hastelloy B/C or any other material on request

Soft Seat & Polymer

BunaN (Nitrile), Neoprene, Fluroelastomer (Viton), PTFE or any other material suitable for process / on request

Diaphragm

Reinforced Polymers like Buna N (Nitrile), Neoprene, Fluroelastomer and PTFE

Spring

Carbon Steel IS4454 Gr.II / III, H12, EN47, SS302, SS316, Inconel X750 or any other material on request.

Spring Housing

Fabricated Steel (Standard) and other on request.

Other Product Item

Safety Relief Valves
Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system can have disastrous effects on both plant and personnel. Spring Loaded Safety Valves
Read More
Balanced Bellow
R019 Series Balanced Pressure Relief Valve – Bellow Type A balanced pressure relief valve is a spring loaded pressure relief valve, which incorporates a bellow or other means of
Read More