R012 SERIES - Conventional Bolted Bonnet
R016 SERIES - Conventional Screwed Bonnet
Conventional
Conventional Safety Relief Valves
Conventional Safety Relief Valves are those, which work on simple working principle of force balance.
The basic elements of a spring-loaded PSV/SRV include an inlet nozzle mounted in valve body, which is connected to the vessel or system to be protected, a movable disc, which controls flow through the nozzle and a spring, which controls the position of the disc.
The operation of a conventional spring-loaded PSV/SRV is based on a force balance principle. Under normal operating conditions, until the pressure at the inlet is below the set pressure or opening pressure, the disc is seated on the nozzle preventing flow through the nozzle.
When the pressure at inlet exceeds set pressure/opening pressure, then pressure force on the bottom of disc overcomes the spring force, lifts the disc affecting opening of valve and relieves the excessive pressure in system.
When the inlet pressure drops sufficiently below the set pressure / opening pressure, the spring force overcomes the pressure force, the disc re-seats on nozzle and valve closes.
An adjustable Blow Down Ring is provided for adjusting the opening in the annular orifice, thus controlling the pressure build-up in the huddling chamber. This controlled pressure build-up in the huddling chamber will overcome the spring force causing the disc to move away from the nozzle seat, and the valve will pop open. With this, fine adjustment in over pressure and blow down can be done.
As a standard, unless specified, all our Safety Relief Valves are Full Nozzle Full Lift and tested for 10% over pressure.
Following Series of Models are supplied
Features
Design : Semi Nozzle / Full Nozzle Full Lift
Metallic Seating with zero leakage
Polymeric Sealing if required by the User
Open Bonnet or Closed Bonnet depending of Operating Temperature
Blow Down Ring for fine adjustment of reseating pressure
Special Double Blow Down Design can be offered
Over Pressure and Blow Down as per API 521 and ASME
Tamper - Resistant Adjustment ie Cap Screwed / Bolted
Wide set range for various applications
Accurate low pressure regulation for Special designed large bore and semi nozzle
Wide material range
Various Options and Accessories Available
Manual Lever : Plain or Packed
Test Gag
Open Bonnet for High Temperature
Semi Nozzle for Large Bore – above 6”
Water Seals for Vacuum and / or Seat Cooling Operation.
Material Of Construction
CS A216 Gr WCB (standard), CF8, CF8M, Aluminium, CF3, CF3M, WC6, WC9, LCB, LCC, Monel, Inconel or any other material on request.
St St316 (standard), St St304, 316L, Monel, Inconel or any other material on request
St St316 (standard) , St St304 or any other material suitable for process
Carbon Steel IS4454 Gr.II / III, H12, EN47, SS302, SS316, Inconel X750 or any other material on request.
Polymeric sealing suitable to process fluid.
Other Product Item
Balanced Bellow-old
R019 Series Balanced Pressure Relief Valve – Bellow Type A balanced pressure relief valve is a spring loaded pressure relief valve, which incorporates a bellow or other means of
Safety Relief Valves
Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system can have disastrous effects on both plant and personnel. Spring Loaded Safety Valves